Locomotive Consulting | New Product Design | Parts & Service

Catalog

Our products are Engineered to the highest industry standards available.

This is our current product offering, if you have any questions please click the corresponding "Request More Information" button to have one of our qualified professional support staff contact you.

Locomotive Layover Battery Charger is designed for locomotive applications and rigidity. This Battery Charger can be easily adapted to any Commuter Locomotive, replacing the existing Layover Battery Charger.

This Layover Battery Charger is a direct replacement for the KBC Battery Charger product line for Locomotive and Heavy Equipment applications.

Input Voltage.....................................................480V or 575V 3-Phase
Maximum Current...............................................50 Amps
Maximum Voltage...............................................75 Volts
Voltage Ripple....................................................≤ 5%
Current Ripple....................................................≤ 5%
Operational Ambient Temperature.......................-25C to +85C
Storage Temperature.........................................-30C to +100C
Loss of Phase Detection

Operational Modes:
Constant Current Until Target Voltage is Reached
Constant Voltage When Target Voltage is Reached

LED User Display Readouts:
Firmware Level
Output Current
Output Voltage

Dimensions:
Height.................................................................27.51"
Width..................................................................16.02"
Depth..................................................................8.30"
Weight................................................................105 lbs

View User Manual/Specifications
 

This inverter is capable of providing 10A clean sine wave 120VAC running off locomotive 74V system.
It has a wide operating range of operation 56-90VDC allowing the inverter to provide 120VAC even when the locomotive is not running.  It is protected with a 10A circuit
 
Circuit Breaker needs external 20A Circuit Breaker to protect the line input power provided by  cab builder. It is typicly used to power 120VAC oulets including running any accesories that require 120VAC power, refrigirator, microwave etc AC outlets needed for Laptops.
 

This power supply  intended to power 24 VDC locomotive systems. ECM's and 24 volt Windshield Wiper Systems, the small packaging allows easy installation in Control Stand, HEP cabinet, High Voltage Cabines, shortnose ETC.
It comes complete with low voltage dropout protection (29VDC) and can run continuesly with zero load.
Input Voltage range is 30-90VDC with a 30 sec undervoltage protectection for ECM startup voltage droop.
 

This LED light is a stand alone fixture, it does not require any additional harnesses from the supercap supply, it meets FRA emergency egress lighting requirement, once the  120VAC feed is lost the LED turns  on for 90 minutes allowing illumination incase battery power is lost, can also be used on locomotives that require Emergency light to come on once Emergency Brake is toggled.   
Can be installed in a locomotive cab above each door or in all coach  cars as Emergency lighting.
It has a built in potentiometer so the light intensity can be adjusted for smaller or larger areas.
The operating voltage can be powered from a locomotive 74VDC system (56-90VDC) or 120 VAC caach power .
 

This power supply is intended to power 12 VDC locomotive systems. It is capable of powering up all 12VDC locomotive systems such  video system, GPS and PTC systems that operate on 12VDC. The small packaging allows easy installation in Control Stand, HEP cabinet, High Voltage Cabinets, Shortnose ETC.
It comes complete with low voltage dropout protection (29VDC) and can run continuously with zero load.
Input Voltage range is 30-90VDC with a 30 sec under voltage protection for ECM startup voltage droop.

 

View Specifications


The Dual Voltage Power Supply is designed for use in locomotive applications.
It can be installed in high voltage cabinets, control stands, or auxiliary cabinets
where lower voltage is required..

Input Voltage.....................................................18-85 VDC
Output Voltage................................................1.5-5.0 VDC

Dimensions:
Height......................................................................3.50"
Width.......................................................................1.37"
Depth.......................................................................2.25"
Weight......................................................................0.30lbs

 

View Specifications


The 24 VDC Power Supply is designed for use in locomotive applications.
It can be installed in high voltage cabinets, control stands, or auxiliary cabinets
where lower voltage is required.

Input Voltage...........................................................74 VDC
Output Voltage........................................................24 VDC

Dimensions:
Height......................................................................3.50"
Width.......................................................................2.15"
Depth.......................................................................2.25"
Weight......................................................................0.53lbs View Specifications


The 32 VDC Power Supply is designed for use in locomotive applications.
It can be installed in high voltage cabinets, control stands, or auxiliary cabinets
where lower voltage is required.

Input Voltage...............................................................74 VDC
Output Voltage..............................................................32 VDC

Dimensions:
Height......................................................................3.50"
Width.......................................................................2.15"
Depth.......................................................................2.25"
Weight......................................................................0.53lbs


The Boost Power Supply is designed for use in locomotive applications. It can be installed in high voltage cabinets, control stands, or auxiliary cabinets. Locomotive battery voltage can drop to as low as 36 volts, during starting operations. The 74 VDC boost power supply is designed to maintain a minimal voltage output of 63 volts to maintain electrical systems that require an uninterrupted power source. Light weight and small footprint design allows for easy installation in small compartments. Easy to install, Din rail mounting system that can also be modified to accept more than one power supply side by side.

Input Power:
Voltage Range........................................................36 VDC - 88 VDC
Current....................................................................185W at 74 VDC

Output Power:
Load........................................................................1.5 Amps @ 63 VDC
Efficiency..................................................................88%

Dimensions:
Height......................................................................3.50"
Width.......................................................................4.17"
Depth.......................................................................2.25"
Weight......................................................................1.16lbs
Environmental:
Operational Temperature........................................-30C to +85C
Storage Temperature..............................................-40C to +100C


View Specifications


Locomotive Isolated Power Supply. 33 amp DC to DC converter. Intended to power 24 VDC locomotive systems. ECM's and 24 volt Windshield Wiper Systems, plus anything else within the 24 VDC operating range.

Input Voltage...........................................................74 VDC
Output Voltage........................................................24 VDC

Dimensions:
Height......................................................................8.00"
Width.......................................................................9.00"
Depth.......................................................................5.75"
Weight......................................................................11lbs View Specifications


The LCD indicator light panel is a direct replacement for any egg crate style indicator panel. It can be installed in high voltage cabinets, control stands, or
auxiliary cabinets as needed. Adjustable brightness, liquid crystal display allows for installation in low and high lighting conditions. Touch screen interface allows user to navigate through menu items and program a number of functions to display.

Input Voltage...........................................................74 VDC

Dimensions:
Height......................................................................3.50"
Width.......................................................................4.00"
Depth.......................................................................2.00"
Weight.....................................................................1 lb

View Specifications
View Indicator Programming Chart


The Interface Unit is a compact PA/IC designed for use in locomotives consists.

Dimensions:
Height......................................................................8.75"
Width.......................................................................5.75"
Depth.......................................................................2.13"
Weight......................................................................2.62lbs View Specifications


Trainline mode selector switch. Enable and disable in M.U. mode.
Signal to control cars to power ammeter.

Input Voltage...........................................................74 VDC
Output Voltage........................................................15 VDC

Dimensions:
Height......................................................................8.00"
Width.......................................................................6.50"
Depth.......................................................................1.75"
Weight......................................................................3.34lbs

View Manual/Specifications


The snubber diode is a flyback suppression diode and is designed for use in
Locomotive applications. Can be installed in high voltage cabinets, control stands, or auxiliary cabinets.


The avalanche diode is designed for use in Locomotive applications.
Can be installed in high voltage cabinets, control stands, or auxiliary cabinets.


We've partnered with Locomotive Parts Online to bring over 500 New and Used Locomotive Parts
View the Complete List of Used Parts